Products -> Mosquito net
Kit 30-H
Instructions for cutting and assembly
CUT THE BOX

Width of opening
minus 18 mm

CUT THE TRACKS
If you are going to
fix between walls
Height of opening
minus 42 mm
Option:fixing to ceiling
Height of opening
minus 46 mm
CLEANING

Clean the dust, and
shavings produced
during the cutting proccess
with and air gun
brush etc..
 ACCESORIES

Open the kit and check
that all the pieces are
included. (look at the "parts
and accesories page)
CROWN

Insert the crown
to the aluminum tube
This crown must always
be placed on the right side
of the box
 SPRINGLESS
BOX END

Place and adjust
the springleess
end box
SPRINGLESS BOX END

Screw the springleess
end box
 BOX END WITH SPRING

Place the box end with
spring
BOX END WITH
SPRING
Tighten the spring and net
by rolling the end box in
the direction of the clock
hand
 BOX END WITH
SPRING

Screw the box end
with spring
CHECK

Check that the
tighten of spring
is correct

 TOGGLE CORD


Place and insert
the toggle cord
in the botton profile
HANDLES

Slide the handles
in the trail of the
botton profile

 BOTTON PROFILE
INSERT
Plug the botton profile
inserts, with the help of
a plastic hammer
AND....
YOU ARE DONE