| Installation instructions | |||
 |
CLIPS Place marks for three clips on lateral wall of opening on the side that you want the box to be placed (left or right) |
 |
MAKING THE HOLES Make 3 holes in the side of wall that you want the box to be placed by using a drill of 6 mm |
 |
RAWLS Place the rawls in the side wall holes |
 |
CLIPS Screw the clips to the side wall |
 |
END CAPS Draw the corresponding hole to the floor and ceiling |
 |
MAKING HOLES Make the holes in the floor and ceiling |
 |
RAWL Place the raws in the ceiling and floor holes that you just made |
 |
BOX ENDS Screw the box ends to ceiling and floor |
| 2nd BOX Redo all the former steps to make an exact replica |
 |
TRACKS Make holes on the tracks at 5 cm from the ends |
|
 |
GUIAS Insert the skid (undivided) in the left part of the upper track |
 |
UPPER TRACKS Insert the upper tracks in the fin of the box ends |
 |
UPPER TRACKS Place the skid between the two upper tracks with the help of the screw driver |
 |
MAKING HOLES By using the screw driver helper, open holes at the ceiling in order to fix the tracks & the double skid |
 |
UPPER TRACKS By using the screw driver Screw the upper tracks and the skid to the ceiling |
 |
LOWER TRACKS Insert the lower tracks in the fin of the box ends |
 |
LOWER TRACKS Place the skid between the two lower tracks with the help of the screw driver |
 |
MAKING HOLES Openholes at the ceiling in order to fix the lower tracks & the double skid |
 |
LOWER TRACKS Screw the lower tracks to the floor with the help of the screw driver helper |
 |
CHECKING Center the handles insert the plug buttons & check the correct closing of the system and magnet |